Nighthawk AC1900 WiFi Cable Modem Router
Specify Internet Port Settings User Manual79
If the service that you want to add is not in the list, create a custom service. See Add a
Custom Port Forwarding Service on page 79.
9. In the Server IP
Address field, enter the IP address of the computer that will provide the
service.
10. Click the Ad
d button.
The service displays in the list.
Add a Custom Port Forwarding Service
To add a custom service:
1. F
ind out which port number or range of numbers the application uses.
You can usually find this information by contacting the pu
blisher of the application or user
groups or news groups.
2. Launch an Inte
rnet browser from a computer or wireless device that is connected to the
network.
3. T
ype http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
4. Ente
r the user name and password.
The user name is adm
in. The user name and password are case-sensitive.
The BASIC Home page displays.
5. Select ADV
ANCED > Advanced Setup > Port Forwarding/Port Triggering.
6. Leave the Po
rt Forwarding radio button selected as the service type.
7. Click the Ad
d Custom Service button.
8. In the Service Name field, enter a descriptive name.
9. In the Servic
e Type field, select the protocol. If you are unsure, select TCP/UDP.
10. In the Extern
al Starting Port field, enter the beginning port number.
If the application uses a single port, enter the same port number in the Ending Port field.