EasyManuals Logo

NETGEAR Nighthawk C6900 User Manual

NETGEAR Nighthawk C6900
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
Nighthawk AC1900 WiFi Cable Modem Router
Specify Internet Port Settings User Manual80
If the application uses a range of ports, enter the ending port number of the range in the
External Ending Port field.
11. Specify the internal ports by one of these methods:
Leave the Use the same port range for Internal port check box selected.
Type the port numbers in the Internal Starting Port and Internal Ending Port fields.
12. Type the IP address in the Internal IP address field or select the radio button for an
attached device listed in the table.
13. Click the Apply button.
The service is now in the list on the Port Forwarding/Port Triggering page.
Edit a Port Forwarding Service
To edit a port forwarding entry:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter the user name and password.
The user name is admin. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
5. Leave the Port Forwarding radio button selected as the service type
6. In the table, select the radio button next to the service name.
7. Click the Edit Service button.
The Ports - Custom Services page displays.
8. Specify changes to any of the following settings:
Service Name. Type the service name.
Service Type. If you are unsure, select TCP/UDP.
External Starting Port: If the application uses a single port, enter the same port
number in the External Ending Port field. If the application uses a range of ports,
enter the ending port number of the range in the External Ending Port field.
For the internal ports, leave the Use the same port range for Internal port check
box selected.
Internal IP address. Type the IP address in the Internal IP address field, or select the
radio button for an attached device listed in the table.
9. Click the Apply button.
Your changes are saved.

Table of Contents

Other manuals for NETGEAR Nighthawk C6900

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk C6900 and is the answer not in the manual?

NETGEAR Nighthawk C6900 Specifications

General IconGeneral
DOCSISDOCSIS 3.0
Channel Bonding24x8
Wireless Standard802.11a/b/g/n/ac
Wireless Frequency Bands2.4 GHz & 5 GHz
ModemCable Modem
Memory128 MB Flash and 256 MB RAM
Beamforming+Yes
Dynamic QoSYes
Smart ConnectYes
VPN SupportYes
Parental ControlsYes
Guest NetworkYes
WiFi Technology802.11ac
Maximum WiFi Speed1900 Mbps
Number of Ethernet Ports4 x Gigabit Ethernet ports
USB Ports1 x USB 2.0 port
Weight1.65 lbs
Processor1.0GHz dual-core processor

Related product manuals