Name: NETGEAR Nighthawk C6900
Brand: NETGEAR
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Nighthawk AC1900 WiFi Cable Modem Router

Specify Network Settings User Manual44

Specify the IP Addresses that the Modem

Router Assigns

By default, the modem router acts as a Dynamic Host Configuration Protocol (DHCP) server.

The modem router assigns IP, DNS server, and default gateway addresses to all computers

connected to the LAN. The assigned default gateway address is the LAN address of the

modem router.

These addresses must be part of the same IP address sub

net as the modem router’s LAN IP

address. Using the default addressing scheme, define a range between 192.168.0.2 and

192.168.0.254, although you can save part of the range for devices with fixed addresses.

To specify the pool of IP addresses that the modem router assigns:

1. Laun

ch an Internet browser from a computer or wireless device that is connected to the

network.

2. Ty

pe http://www.routerlogin.net or http://www.routerlogin.com.

A login window opens.

3. Enter th

e user name and password.

The user name is ad

min. The user name and password are case-sensitive.

The BASIC Home page displays.

4. Select A

DVANCED > Setup > LAN Setup.

5. Make sure that the Use Router as DHCP Server check box is selected.

6. S

pecify the range of IP addresses that the modem router assigns:

a. In the S

tarting IP Address field, type the lowest number in the range.

Other manuals for NETGEAR Nighthawk C6900

Questions and Answers:

Need help?

Do you have a question about the NETGEAR Nighthawk C6900 and is the answer not in the manual?

General