Nighthawk AC1900 WiFi Cable Modem Router
Troubleshooting User Manual88
DHCP server. These autogenerated addresses are in the range of 169.254.x.x. If your
IP address is in this range, check the connection from the computer to the modem
router, and reboot your computer.
• If your modem router’s IP address was changed and you do not know the current IP
address, clear the modem router’s configuration to factory defaults. This sets the
modem router’s IP address to 192.168.0.1. For more information, see
Factory
Settings on page 93.
To Next Page
Loading...
