NETGEAR Nighthawk M2 MR2100

2
1
3
4
5
DescriptionNumber
Cover1
SIM card slot2
Battery3
Enlargement of battery contacts4
Reset5
To install the SIM card and the battery:
1.
Make sure that power to the mobile router is off.
2.
Remove the cover on the bottom of the mobile router.
Place your thumbs on the arrows on the cover and press down while sliding the
cover up.
3.
Carefully slide the SIM card into the slot.
4. Align the battery connectors and insert the battery.
User Manual14Get Started
Nighthawk M2 Model MR2100