Enable SIM Security
If you enable SIM security, you must enter a SIM PIN each time you power on the mobile
router.
Enable SIM Security From the NETGEAR Mobile App
To enable SIM security:
1. On your smartphone, connect to the mobile router’s WiFi network.
2. Launch the NETGEAR Mobile app.
3. Swipe down.
The dashboard displays.
4.
Tap Security.
The Security page displays.
5.
Tap SIM Security.
The SIM Security page displays.
6.
Tap ACTIVATE.
The Enter SIM Security page displays.
7. Enter a PIN.
8.
Tap OKAY.
Your settings are saved.
If you enter an incorrect PIN three times, the SIM is blocked. If the SIM is blocked,
contact your network service provider to receive a PUK number to unblock the SIM.
Enable SIM Security From a Web Browser
To enable SIM security:
1. From a computer that is connected to your network, launch a web browser.
2.
Enter http://m.home or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
User Manual50Control Internet Access
Nighthawk M2 Model MR2100
To Next Page
Loading...
