c.
Tap CONNECT.
When the hotspot is offloading the Internet connection, the WiFi icon displays the
signal strength. The screen displays the SSID of the active WiFi network.
Enable WiFi Data Offloading From a Web Browser
To enable WiFi data offloading:
1. From a computer that is connected to your network, launch a web browser.
2.
Enter http://m.home or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4.
Select SETTINGS > Setup > Data Offloading.
The Data Offloading page displays.
5.
Select the Enable check box.
6.
Select the WiFi radio button.
By default, the Ethernet radio button is selected.
7.
Click the Apply button.
Your settings are saved.
8.
Click the Scan Network button.
9. From the menu, select the WiFi network.
10. When prompted, enter the WiFi password.
11.
Click the Continue button.
The WiFi network is added to the list of preferred networks.
Enable Ethernet Data Offloading From a Web Browser
To enable Ethernet data offloading:
1. From a computer that is connected to your network, launch a web browser.
2.
Enter http://m.home or http://192.168.1.1.
A login page displays.
User Manual38Manage Your Internet
Connection
Nighthawk M2 Model MR2100
To Next Page
Loading...
