Turn Off USB Tethering From the Touch Screen
To turn off USB tethering from the touch screen:
1. From a computer that is connected to your network, launch a web browser.
2.
To wake the device, press the Power button.
3.
Tap the Home button.
4.
Tap the Settings button.
The USB Tethering dialog displays.
5.
Tap the ON button to change it to OFF.
USB tethering is turned off.
Turn Off USB Tethering From the NETGEAR Mobile App
To turn off tethering:
1. On your smartphone, connect to the mobile router’s WiFi network.
2. Launch the NETGEAR Mobile app.
3. Swipe down.
The dashboard displays.
4.
Tap Settings.
The Settings page displays.
5.
Tap General.
The General page displays.
6.
Under ROUTER, tap Tethering to toggle between Charge only and Charge + tether.
Turn Off USB Tethering From a Web Browser
To turn off tethering:
1. From a computer that is connected to your network, launch a web browser.
2.
Enter http://m.home or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
User Manual46Control Internet Access
Nighthawk M2 Model MR2100
To Next Page
Loading...
