Turn UPnP Off or On From the NETGEAR Mobile App
By default, UPnP is enabled in the mobile router, but you can disable and enable this
feature.
To disable or enable UPnP:
1. On your smartphone, connect to the mobile router’s WiFi network.
2. Launch the NETGEAR Mobile app.
3. Swipe down.
The dashboard displays.
4.
Tap Settings.
The Settings page displays.
5.
Tap General.
The General page displays.
6.
Tap the Enable UPnP slider.
UPnP toggles off or on.
Turn UPnP Off or On From a Web Browser
By default, UPnP is enabled in the mobile router, but you can disable and enable this
feature.
To disable or enable UPnP:
1. From a computer that is connected to your network, launch a web browser.
2.
Enter http://m.home or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4.
Select SETTINGS > Advanced Settings > Other.
The Router Settings page displays.
5.
Select the UPnP Disable or Enable button.
UPnP toggles off and on.
6.
Click the Apply button.
User Manual60Specify Mobile Router Network
Settings
Nighthawk M2 Model MR2100
To Next Page
Loading...
