Figure 6. Ethernet offloading with AC charging and a USB storage device
If you want to use a tethered USB connection and offload, use WiFi or Ethernet offloading.
Enable Data Offloading From the NETGEAR Mobile App
To enable data offloading from the NETGEAR mobile app:
1. Launch the NETGEAR Mobile app on your smartphone.
2. Swipe down.
The dashboard displays.
3.
Tap Offloading.
The Offloading page displays.
4.
Select WiFi.
The Offloading page displays a list of WiFi networks in your area.
5.
To connect to a network on the list, do the following:
a. Tap a WiFi network.
b.
When prompted, enter the password for the WiFi network and tap CONNECT.
6.
To join another WiFi network that is not in the list, do the following:
a.
Tap Join Network.
b. When prompted, type the network name and the password.
c.
Tap CONNECT.
7.
To offload to a preferred network, do the following:
a.
Tap Preferred Networks.
A list of preferred networks displays.
b. Select the network and enter the password.
User Manual37Manage Your Internet
Connection
Nighthawk M2 Model MR2100
To Next Page
Loading...
