To turn the LED blinking on or off:
1. From a computer that is connected to your network, launch a web browser.
2.
Enter http://m.home or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4.
In the upper right corner, click the menu icon.
The menu opens.
5.
Select LED Settings.
The LED Settings page displays.
6.
Select the Enable LED blinking or Disable LED blinking radio button.
7.
Click the Apply button.
Your settings are saved.
Back Up and Restore the Mobile Router
Settings
You can back up and restore mobile router settings. Backing up and restoring is useful
if you use more than one device and you want the same settings on all of your devices.
You can also save your settings before resetting to factory defaults or changing the
settings.
Back Up the Mobile Router Settings
To back up mobile router settings:
1. From a computer that is connected to your network, launch a web browser.
2.
Enter http://m.home or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
User Manual77Manage Your Mobile Router
Network
Nighthawk M2 Model MR2100
To Next Page
Loading...
