5.
In the TETHERING section, select Charge only.
Your settings are saved. When you connect the USB type C cable, the mobile router
battery charges, but you cannot use the tethered connection to access the mobile
router with a web browser.
Use the Mobile Router to Jump Boost
Another Device
If your smartphone or other device is low on or out of battery power, you can give it a
boost by connecting it to the mobile router’s USB port A connector.
Figure 5. Jump boost begins automatically once the devices are connected
User Manual29Manage Battery Usage and
Charging
Nighthawk M2 Model MR2100
To Next Page
Loading...
