To log in to the mobile router from the NETGEAR Mobile app:
1. On your smartphone, connect to the mobile router’s WiFi network.
2. Launch the NETGEAR Mobile app.
You might be prompted to enter the admin password. During setup, you were
prompted to change this password (the default password is admin).
3.
If prompted, enter the admin password.
The app displays the following information:
•
Notifications
•
Data usage as provided by your carrier
•
Your cellular and WiFi signals and battery
•
Current WiFi band (swipeable)
•
WiFi name and password
•
Connected devices.
4. Swipe down.
The dashboard displays the icons shown in the following table.
DescriptionIconDescriptionIcon
StorageWiFi
SecurityOffloading
Network MapNumber of connected
devices
User Manual22Connect to the Mobile Router
Nighthawk M2 Model MR2100
To Next Page
Loading...
