6.
To add an Access Point Name (APN) with its profile settings, do the following:
a.
Click the ADD button
b.
Complete the fields.
c.
Click the ADD button.
The Cellular page displays the APN.
d. To make this APN the active APN, click the radio button next to the APN name.
e.
Click the SAVE button.
The APN is now the active APN. The Cellular Settings page also displays a check
box next to the new APN name. This check box lets you select the APN so that
you can delete it.
Note: The page does not display a check box next to the default TelstraInternet
APN name because you cannot delete that APN.
User Manual41Manage Your Internet
Connection
Nighthawk M2 Model MR2100
To Next Page
Loading...
