Page 4 of 4
CHAPTER 2: Getting Started
This chapter will walk you through the steps to start managing your switch. This chapter will cover how to
get started in a network with a DHCP server (most common) as well as if you do not have a DHCP server.
Network with DHCP server:
Connect the Smart Switch to a DHCP network.
Power on the Smart Switch by plugging in power cord.
Install the Smartwizard Discovery program on your computer
Start the Smartwizard Discovery utility. (Chapter 4 has detailed instructions on the Smartwizard Discovery
utility)
Click Discover of the Smartwizard Discovery utility to find your switch. You should see a something similar
to Figure 2-1.
Select your switch by clicking on it. Then click on Web Access, as highlighted in Figure 2-2.
Smartwizard Discovery Utility > Discover
Figure 2-1. Smartwizard Discovery Utility Main Screen
To Next Page
Loading...
