Page 8 of 8
CHAPTER 3: Web Management Access
Your NETGEAR Smart Switch series provides a built-in browser interface that lets you configure and
manage it remotely using a standard Web browser such as Microsoft Internet Explorer or Netscape
Navigator. This interface also allows for system monitoring of the switch. The help page will cover many of
the basic functions and features of the switch and its web interface.
Web Management requires either Microsoft Internet Explorer 5.0 or later or Netscape Navigator 6.0 or
later.
Note: Only one user can be logged in at any time.
Figure 5-1. Web Management Login page
There are 3 menu options available:
• System
• Switch
• Firmware
There is a Help Menu in the top of right side of screen. Click the help to read the full Help Menu. On some
pages, there is a Help button. If you click that button, you will go to the part of the Help Menu that
discusses that page.
Within the various browser interface pages, there are several buttons that you can use. Their names and
functions are below:
Refresh: Pulls that screen’s data from current values on the system
Apply: Submits change request to system and refreshes screen data
Add: Add new entries to table information and refreshes screen data
To Next Page
Loading...
