Name: NETGEAR R7500
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Factory Settings

You can return the router to its factory settings. Use the end of a paper clip or a similar object to press

and hold the Reset button on the back of the router for at least seven seconds.The router resets and

returns to the factory configuration settings shown in the following table.

Table 3. Factory default settings

Default BehaviorFeature

www.routerlogin.com or www.routerlogin.netUser login URLRouter

adminUser name (case-sensitive)

passwordLogin password (case-sensitive)

Use default hardware addressWAN MAC addressInternet

connection

1500WAN MTU size

AutoSensingPort speed

192.168.1.1LAN IPLocal

network

(LAN)

255.255.255.0Subnet mask

EnabledDHCP server

192.168.1.2 to 192.168.1.254DHCP range

Pacific timeTime zone

192.168.1.2DHCP starting IP address

192.168.1.254DHCP ending IP address

DisabledDMZ

DisabledTime adjusted for daylight saving time

DisabledSNMP

Disabled (except traffic on port 80, the HTTP

port)

Inbound (communications coming in from

the Internet)

Firewall

Supplemental Information

181

NETGEAR R7500 Specifications

General

NETGEAR R7500 User Manual

Other manuals for NETGEAR R7500