View or Change WAN Settings
You can view or configure wide area network (WAN) settings for the Internet port.You can set up a DMZ
(demilitarized zone) server, change the maximum transmit unit (MTU) size, and enable the router to
respond to a ping to its WAN (Internet) port.
To view or change the WAN settings:
1. Launch a web browser from a computer or wireless device that is connected to the network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > WAN Setup.
The following settings display:
Network Settings
125
To Next Page
Loading...
