11
Network Settings
The router comes ready for WiFi, Ethernet, and USB connections.You can customize the router’s network
settings. NETGEAR recommends that you install the router and connect it to the Internet before you change
its network settings.
This chapter includes the following sections:
• View or Change WAN Settings on page 125
• Set Up a Default DMZ Server on page 126
• Change the Router’s Device Name on page 127
• Change the LAN TCP/IP Settings on page 128
• Specify the IP Addresses That the Router Assigns on page 130
• Disable the DHCP Server Feature in the Router on page 131
• Manage Reserved LAN IP Addresses on page 132
• Use the WPS Wizard for WiFi Connections on page 134
• Specify Basic WiFi Settings on page 134
• Change the WiFi Password or Security Level on page 138
• Enable a WiFi Video Network on page 139
• Set Up a Guest WiFi Network on page 139
• Enable a WiFi Video Network on page 139
• Control the Wireless Radios on page 142
• Set Up a Wireless Schedule on page 143
• Specify WPS Settings on page 144
• Use the Router as a Wireless Access Point on page 145
• Use the Router in Bridge Mode on page 147
124
To Next Page
Loading...
