NETGEAR SXK50 - Page 85

The router includes a default VLAN tag group, which is a VLAN profile with the name
*IPTV and VLAN ID 1. You can select this VLAN profile for a LAN port, allowing the VLAN
profile to function as a bridge between the WAN port and the LAN port.
The IPTV profile does not apply to satellite LAN ports.
To assign a LAN port to the IPTV profile:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi Pro network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see What to do if you get a browser security warning on
page 30.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you set the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > VLAN / Bridge Settings.
The VLAN / Bridge Settings page displays.
For the router (Base) and each satellite, the ports display on the page:
•
Blue: The ports are connected to devices that are turned on.
•
Gray: The ports are either not connected or are connected to devices that are
not turned on.
5.
In the Base (router) section, for the Ethernet LAN port to which the IPTV device is
connected, select 1(*IPTV) from the VLAN Profile menu.
The selection from the Mode menu automatically changes to Trunk.
6. Click the Apply button.
Your settings are saved.
User Manual85Manage the VLANs
Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50