The VLAN / Bridge Settings page displays.
For the router (Base) and each satellite, the ports display on the page:
•
Blue: The ports are connected to devices that are turned on.
•
Gray: The ports are either not connected or are connected to devices that are
not turned on.
5.
In either the Base (router) or Satellite section, for the Ethernet port that you want to
change, select Access or Trunk from the Mode menu.
6. Click the Apply button.
Your settings are saved.
User Manual87Manage the VLANs
Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50
To Next Page
Loading...
