Initial Setup
23
802.11ac Wireless Access Point Model WAC120
To edit the security profile settings:
1. Launch a web browser on the computer that is connected to the access point.
2. Enter http://1
92.168.0.100 in the address field of the browser.
A login prompt displays.
3. Enter the user name and password.
The user name is
admin and t
he default password is password.
The General screen displays.
4. Select Configuration > Security.
For initial configuration and testing, the Security field for Profile 1 (the default profile) is
set to Open System and the SSID is set to NETGEAR_11ng (for information about how to
configure a profile, see Basic Wireless Settings on page 17
).
Note: The SSID of any wireless client must match the SSID you configured
in the access point. If th
ey do not match, you cannot get a wireless
connection.
5. Select the profile that you want to change and click the Edit
button.
To Next Page
Loading...
