NETGEAR WAC120

Manage the Access Point
54
802.11ac Wireless Access Point Model WAC120
4. Select Configuration > System > Advanced > SysLog.
5. If your LAN includes a syslog server, select the Enable Syslog check box.
6. In the Syslog
Server IP Address field, type the IP address of your syslog server.
The access point sends all the syslog files to the specified IP address
if the syslog option
is enabled. The default is 0.0.0.0.
7. In
the Port N
umber field, type the port number that your syslog server is configured to
use.
The default port number is 514.
8. Click the Apply
button.
Your settings are saved.