Supplemental Information
111
ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730
Time zone USA-Pacific
NTP client Enabled
Custom NTP server Disabled
Port speed 10/100/1000
Ethernet MAC address See bottom label
Radio and wireless settings
Operating mode Access point, infrastructure mode
Wireless access point name netgearxxxxxx, where xxxxxx are the last 6 digits
of the wireless access point MAC address
Country and region Varies by region
Wireless communication 2.4 GHz radio enabled
5 GHz radio enabled
Wireless modes 11bg/ng/bgn
11a/a-na-ac
Wireless network names (SSIDs) NETGEAR_11ng
NETGEAR_11ac
Broadcast network names (SSIDs) Enabled
Radio frequency channels 11ng: Auto
11ac: Auto
MCS index/data rate (transmission speed) Best
Note: Maximum wireless signal rate derived
from IEEE Standard 802.11 specifications.
Actual throughput will vary. Network conditions
and environmental factors, including volume of
network traffic, building materials and
construction, and network overhead, lower actual
data throughput rate.
Channel width 11ng: 20 MHz
11ac: Dynamic 20/40 MHz
Guard interval Auto
Output power Full
Wireless on/off (radio scheduling) Disabled
RTS threshold 2347
Fragmentation length 2346
Table 3. Default configuration settings (continued)
Feature Description
To Next Page
Loading...
