Wireless Configuration and Security
41
ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730
Configure RADIUS Server Settings
For authentication, accounting, or both authentication and accounting using RADIUS, you
must configure primary servers and optional secondary servers. These RADIUS server
settings can apply to all devices that are connected to the wireless access point.
You can configure both IPv4 and IPv6 servers. In the IPv4 RADIUS Server Settings section,
enter IPv4 addresses only
. In the IPv6 RADIUS Server Settings section, enter IPv6
addresses only.
To configure the RADIUS server settings:
1. Select Configuration > Security >
Advanced > RADIUS Server Settings.
Passphrase Enter a passphrase. The passphrase length needs to be between 8 and 63 characters
(inclusive). The default passphrase is sharedsecret.
You can display the actual passphrase by selecting the Show Passphrase in Clear Text
Ye
s radio button.
Show Passphrase
in Clear
Text
Select the Yes radio button to display the actual passphrase in the Passphrase field. The
default setting is No.
Setting Descriptions
To Next Page
Loading...
