NETGEAR WAC730

Management and Monitoring
70
ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730
Monitor an Ensemble
You can monitor the status of an ensemble from the ensemble dashboard. You can also
monitor the devices connected to members of the ensemble as well as monitor networks
neighboring the ensemble.
 To monitor the status of the Ensemble:
1. Select Monitor > Ensemble >
Access Point.
2. Click the Refresh button.
 To monitor the devices connected to the Ensemble:
1. Select Monitor > Ensemble > W
ireless Stations.
2. Click the Refresh button.
The devices connected to the ensemble display, listed by MAC address.
 To monitor the networks neighboring the Ensemble:
1. Select Monitor > Ensemble > W
ireless Neighborhood.
2. Select the kind of neighboring
APs to display from the Neighbor APs menu.
You can select either APs in the ensemble, APs not in the ensemble, or both.
The APs display in the Wireless Neighborhood table.