Management and Monitoring
55
ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730
• Save the Configuration
• Restore the Configuration
• Restore the Wireless Access Point to the Factory Default Settings
• Reboot the Wireless Access Point Without Restoring the Default Configuration
Save the Configuration
To save your settings:
1. Select Maintenance > Upgrade > Backup Settings.
2. Click the Backup button.
Your browser extracts the configuration file (the file name is config) from the wireless
access point and prompts you for a location on your computer to store the file.
3. Follow the instructions of your browser to save the file.
Restore the Configuration
IMPORTANT:
During the restoration process, do not try to go online, turn off the
wireless access point, shut down the computer, or do anything else
to the wireless access point until it finishes restarting!
To restore your settings from a saved configuration file:
1. Select Maintenance > Upgrade > Restore Settings.
To Next Page
Loading...
Need help?
General
