Management and Monitoring
64
ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730
Monitor Wireless Stations
The Wireless Stations page contains the Available Wireless Stations table. This table shows
all IP devices that are associated with the wireless access point in the wireless network that
is defined by the wireless network name (SSID). The table headings indicate the wireless
modes (802.11bg, 802.11ng, or 802.11bgn for the 2.4 GHz band and 802.11a, 802.11na or
802.11ac for the 5 GHz band).
Note: A wireless network can include multiple wireless access points, all
using the same network name (SSID). This uniformity extends the
reach of the wireless network and allows users to roam from one
wireless access point to another, providing seamless network
connectivity. Under these circumstances, be aware that the Available
Wireless Stations table includes only the stations associated with this
wireless access point.
To view the attached wireless stations, and to view details for a wireless station:
1. Select Monitoring > W
ireless Stations.
The Available Wireless Stations table shows the MAC address, BSSID, SSID, channel,
rate, state, type, AID, mode, and status for each device. For information about these and
more fields, see the following table.
2. T
o update the list, click Refresh.
If the wireless access point is rebooted, the wireless station data is lost until the wireless
access point rediscovers the devices.
To force the wireless access point to look for
associated devices, click Refresh.
Channel / Frequency The channel that the wireless port is using. For information about how to change the
channel and frequency, see Configure 802.11bg/ng/bgn Wireless Settings on
page 20 and Configure 802.11a/a-na-ac Wireless Settings on page 22.
Rogue AP Detection
Enabled indicates that rogue AP detection is enabled. Disabled indicates that it is not.
Setting Description
To Next Page
Loading...
