NETGEAR WAC730

Management and Monitoring
62
ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730
The following table explains the fields of the System page:
Setting Description
Access Point Information
Access Point Name The NetBIOS name. For information about how to change the default name, see
Configure Basic General System Settings and Time Settings on page 16.
Ethernet MAC Address The MAC address of the wireless access point’s Ethernet port.
Wireless MAC Address
for 2.4 GHz
The MAC address of the wireless access point’s wireless card when operating at 2.4
GHz.
Wireless MAC Address
for 5 GHz
The MAC address of the wireless access point’s wireless card when operating at 5
GHz.
Ethernet LLDP Enabled indicates that LLDP is enabled. Disabled indicates that it is not.
Country/Region The country or region for which the wireless access point is licensed for use. For
information about how to change the country or region, see Configure Basic General
System Settings and Time Settings on page 16.
Note: It might not be legal to operate this wireless access point in a country or region
other than one of those identified in this field.
Firmware Version The version of the firmware that is currently installed.