Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
7-6 Advanced Configuration
v3.0, December 2005
2. Select “Any” or “Single address” from the Service User drop-down list. The default value
(Any) will allow the service to be used by everyone on the network. If you select “Single
address”, enter the IP address of the computer that will be allowed to use the service.
3. Select the service type (TCP or UDP) from the Service Type drop-down list.
4. Enter the outbound port number in the Triggering Port box.
5. Enter the inbound connection port information:
a. Connection type (TCP/UDP, TCP, or UDP)
b. Starting port
c. Ending port
The inbound connection information can be obtained from the game or applications manual or
the product’s support Web site.
Editing or Deleting a Service
To edit an existing service:
1. From the Port Triggering menu, select the service you want to edit from the list of services in
the Port Triggering Portmap Table.
2. Click Edit Service or Delete Service, as required.
3. If editing, change the service information on the Port Triggering - Services page, as described
in Adding a new Service above, and click Apply.
To Next Page
Loading...
Need help?
General
