ReadySHARE Printer
65
N900 Wireless Dual Band Gigabit Router WNDR4500v2
6. The first time you access the utility, you are asked to select the printer and click the Connect
button.
Once the connection is established, the status changes to Manually connected by xxx.
You can click the Disconnect button at any time to release the connection. The status
then changes to Available.
After you click the Connect button once on each computer in the network, the utility on each
of them handles the printing queue and handling. The status of the printer is Available on all of
the computers.
• When the status is
Available, you can use the USB printer.
• When the status is Manually connected by xxx, only the xxx computer can use the
printer
. Other network devices must wait until the xxx computer has released the
connection, or until the connection times out (the default time-out value is 30
seconds).
To Next Page
Loading...
Need help?
General
