Wireless-N 150 Router WNR1000v2 User Manual
Using Network Monitoring Tools 6-7
v1.0, September 2009
Viewing a List of Attached Devices
The Attached Devices screen contains a table of all IP devices that the router has discovered on the
local network. Select Attached Devices under Maintenance in the main menu to view the table.
For each device, the table shows the IP address, NetBIOS host name or device name (if available),
and the Ethernet MAC address. To force the router to look for attached devices, click Refresh.
Managing the Configuration File
The configuration settings of the WNR1000v2 router are stored within the router in a
configuration file. You can back up this file to your computer, restore it, or reset it to the factory
default settings.
Select Backup Settings under Maintenance in the main menu to display the Backup Settings.
Figure 6-4
Note: If the router is rebooted, the table data is lost until the router rediscovers the
devices.
Figure 6-5
To Next Page
Loading...
Need help?
General
