Wireless-N 150 Router WNR1000v3 User Manual
Configuring Basic Connectivity 1-11
v1.0, February 2010
– Dial on Demand. The router logs in only when outgoing traffic is present and logs out
after the idle time-out.
– Manually Connect. The router logs in or logs out only when the user clicks Connect or
Disconnect in the Router Status screen.
• Idle Timeout. Your Internet connection is logged out if there is no data transfer during the
specified time interval.
• Domain Name Server (DNS) Address. If you know that your ISP does not automatically
transmit DNS addresses to the router during login, select Use These DNS Servers, and enter
the IP address of your ISP’s primary DNS server. If a secondary DNS server address is
available, enter it also.
Setting Up and Testing Basic Wireless Connectivity
Follow these instructions to set up and test basic wireless connectivity. Once you have established
basic wireless connectivity, you can enable security settings appropriate to your needs.
1. Select Wireless Settings under Setup in the main menu of the WNR1000v3 router.
Note: If you enter or change a DNS address, restart the computers on your network
so that these settings take effect.
Figure 1-10
To Next Page
Loading...
Need help?
General
