Wireless-N 150 Router WNR1000v3 User Manual
Safeguarding Your Network 2-14
v1.0, February 2010
2. On the wireless client, follow its specific networking instructions to enable WPS, to allow it to
connect to the router.
The WNR1000v3 router’s green light ceases blinking and remains on when one of these
conditions occurs:
• The router and the client establish a wireless connection.
• The 2-minute window period expires for establishing a WPS connection. If the connection
is not established, the SSID and security settings will not be changed.
Using the Software Button in the Add WPS Client Screen
1. Log in to the router as described in “Logging In To Your Wireless Router” on page 1-2.
2. Select Add WPS Client in the main menu, and click Next.
3. Select the Push Button setup method.
4. Click the button in the Add WPS Client screen. The Connecting to New Wireless Client
screen displays.
Figure 2-6
Figure 2-7
To Next Page
Loading...
