150Mbps Wireless-N Outdoor AP User Manual
4.3 Wireless Management
4.3.1 Wireless Setup
4.3.1.1 Basic
Providing basic configuration items for wireless AP users, including “wireless network status”,
“SSID”, “Radio Band”, “Radio Mode”, “MAC”, “SSID broadcasting”, “Channel width”,
“Channel sideband”, “Region” and “Channel” several basic configuration items.
Figure 4-7
Ø Wireless network status: You can choose “enable” or “disable” to enable or disable the
“Wireless Network Status”, if what you choose is “Disable”, the AP function of wireless
router will be turned off.
Ø Radio band: You can select the wireless standards running on your network, if you have
Wireless-N, and Wireless-B/G devices in your network, keep the default setting,
802.11b+g+n
Ø Radio mode: You can select radio mode of wireless router, it contains Access Point, Client,
AP+WDS, Repeater and Lazy. The default setting is AP mode.
Ø SSID: The default is Default.
Ø SSID Broadcasting: You can select “enable” or “disable” to enable or disable the broadcast
SSID function, If the setting of this field is disable, wireless client can’t obtain this SSID to
login in, then user have to input the SSID value manually.
To Next Page
Loading...
Need help?
General
