150Mbps Wireless-N Outdoor AP User Manual
4.5.2 DHCP Server
Figure 4-31
Ø DHCP Server Status: Keep the default setting “Enable”, so router is able to use DHCP
function. If a DHCP server has already existed in the network, please select “Disable”.
Ø IP Address Pool: The IP Address pool is used for allocate IP address by DHCP server; The IP
Address pool range is also changeable
Ø DHCP IP Address Reserving: reserve IP address for designed physical address host. If you
want to configure a fixed IP address for some host, please input physical address and IP
address, then click add
4.5.3 DHCP Client Info
Figure 4-32
Display the state of assigned IP by DHCP Server
To Next Page
Loading...
