150Mbps Wireless-N Outdoor AP User Manual
access .The default setting is “Auto” and you can set this value between 1-54Mbps range.
Ø ShortGi: You can select “Enable” or “disable” for shortgi.
Ø Protection: Using 802.11b and 802.11g mixed mode may result in poor network performance.
By enabling 802.11 protection, it will ameliorate performance of 802.11g devices in your
wireless network.
Ø Preamble Type: "Short Preamble" is suitable for heavy traffic wireless network. "Long
Preamble" provides much communication reliability; the default setting is "Long Preamble”.
4.3.2 Multiple AP Setup
The wireless AP supports multiple AP, if you need to open more than one AP, you can choose to
open vice AP function. As priority , vice AP only set the SSID and security management.
The default status of secondary AP is disable , you can select enable to enable the secondary AP.
Please refer to “Wireless Setup Basic” and “Wireless Security” for details.
Figure 4-26
Figure 4-27
Figure 4-28
To Next Page
Loading...
