150Mbps Wireless-N Outdoor AP User Manual
Ø Channel width: This switch allows you to set Router's wireless bandwidth. 20MHz: In this
mode you can get low bandwidth, little interference and slow rate. 40MHz: In this mode you
can get high bandwidth, high interference and rapid rate. Use only when you have a pure
router, draft 802.11n wireless network.
Ø Channel sideband: It controls your wireless router use higher or lower channel when working
on 40MHz.
Ø Region: please select the region where you live in.
Ø Channel: In 20MHz, you can select one channel from 1 to 13 manually, and in 40MHz, you
can select one channel from 1 to 9 or 5 to 13, which provides a choice of avoiding
interference.
4.3.1.2 Security
The item allows you to encrypt your wireless communication, and you can also protect your
wireless network from unauthorized user access. It supplies “None”, “WEP”, “WPA-PSK”,
“WPA2-PSK” and “WPA/WPA2-PSK” five different encryption modes.
4.3.1.2.1 None
“None” means do not encrypt wireless data.
Figure 4-8
To Next Page
Loading...
Need help?
General
