NB2800
User Manual for NRSW version 4.5.0.100
Parameter IPsec Network Settings
Local network The address of your local area network
Local netmask The netmask of your local area network
Peer network The address of the remote network behind the peer
Peer netmask The netmask of the remote network behind the peer
NAT address Optionally, you can apply NAT (masquerading) for packets coming
from a different local network. The NAT address must reside in the
network previously specified as local network.
Client Management
Once you have successfully set up an IPsec tunnel, you can manage and enable clients connecting to
your service. It is possible to generate and download expert mode files for enabled clients which can
be used to easily populate each client.
119
To Next Page
Loading...
