NB2800
User Manual for NRSW version 4.5.0.100
Key Sequence Action
ALT-t Drag the word before point past the word after point, moving point over that word
as well. If point is at the end of the line, this transposes the last two words on
the line.
CTRL-k Delete the text from point to the end of the line
CTRL-y Yank the top of the deleted text into the buffer at point
Please note, that it can be required to apply quotes (") when entering commands with arguments
containing whitespaces.
6.2. Print Help
The help command can be used to get the list of available commands when called without arguments,
otherwise it will print the usage of the specified command.
> help
Usage :
help [ < command >]
Available commands :
get Get config parameters
set Set config parameters
done Check done
update Update system facilities
cert Manage keys and certificates
status Get status information
scan Scan networks
send Send message , mail , techsupport or ussd
restart Restart service
debug Debug system
reset Reset system to factory defaults
reboot Reboot system
shell Run shell command
help Print help for command
no−autologout Turn off auto−logout
history Show command history
exit Exit
6.3. Getting Config Parameters
The get command can be used to get configuration values.
> get −h
Usage :
get [− hsvfc ] <parameter > [ < parameter > . . ]
Options :
−s generate sourceable output
202
To Next Page
Loading...
