NetModule NB2800 - SMS Control Commands

NB2800
User Manual for NRSW version 4.5.0.100
Tunnel 1 Tunnel 2 Tunnel 3 Tunnel 4
NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
OpenVPN
Administration
Tunnel Configuration
Client Management
IPsec
Administration
Tunnel Configuration
PPTP
Administration
Tunnel Configuration
Client Management
GRE
Administration
Tunnel Configuration
L2TP
Administration
Tunnel Configuration
PPTP Tunnel 1 Configuration
Operation mode:
disabled
client
server
Server listen address:
ANY
specify
Server address:
192.168.250.1
Client address range:
192.168.250.10
to
192.168.250.13
Username:
admin
Password:
••••••••
Apply
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
LOGOUT
Figure 5.33.: PPTP Tunnel Configuration
Setting up a server requires the following settings:
Parameter PPTP Server Settings
Listen address Specifies on which IP address should be listened for incoming client
connections
Server address The server address within the tunnel
Client address range Specifies a range of IP addresses assigned to each client
121