NB2800
User Manual for NRSW version 4.5.0.100
Parameter DHCP Server Settings
Persistent leases By turning on this option the router will remember issued leases even
after a reboot. This can be used to ensure that the same IP address
will be assigned to a particular host.
DHCP options By default the DHCP will hand out the interface address as default
gateway and the current DNS server addresses if not configured else-
wise. You can specify fixed addresses here.
Only allow static hosts Any requests coming from none-static hosts will be ignored.
It is also possible to configure specific lease addresses for particular clients.
Parameter DHCP Static Hosts Settings
IP address The IP address of the lease
Identified by Specifies by which criteria the client shall be identified
MAC address The MAC address of the client
hostname The client identifier (DHCP option 61)
port The Ethernet port on which the DHCP request is received
137
To Next Page
Loading...
