NB2800
User Manual for NRSW version 4.5.0.100
Parameter GNSS Server Configuration
Allow clients from Specifies where clients can connect from, can be either everywhere
or from a specific network
Clients start mode Specifies how data transferal is accomplished when a client connects.
You can specify on request which typically requires an R to be sent.
Data will be sent instantly in case of raw mode which will provide
NMEA frames or super-raw which includes the original data of the
GPS receiver. If the client supports the JSON format (i.e. newer
libgps is used) the json mode can be specified.
Please consider to restrict access to the server port, either by a specifying a dedicated client network
or by using a firewall rule.
87
To Next Page
Loading...
