NetModule NB2800 - Events

NB2800
User Manual for NRSW version 4.5.0.100
The status page informs you about the current status of the SDK. It provides an overview about any
finished jobs, you can also stop a running job there and view the script output in the troubleshooting
section where you will also find links for downloading the manuals and examples.
Job Management
Jobs Scripts Triggers
NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
SDK
Administration
Job Management
Testing
DHCP Server
DNS Server
NTP Server
Dynamic DNS
E-mail
Events
SMS
SSH/Telnet Server
SNMP Agent
Web Server
Softflow
Discovery
Redundancy
Voice Gateway
Name Trigger Script Arguments
config_summary manual_trigger config_summary
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
LOGOUT
Figure 5.37.: SDK Jobs
This page can be used to set up scripts, triggers and jobs. It is usually a good idea to create a trigger
first which is made up by the following parameters:
Parameter SDK Trigger Parameters
Name A meaningful name to identify the trigger
Type The type of the trigger, either time-based or event-based
Condition Specifies the time condition for time-based triggers (e.g. hourly)
Timespec The time specification which, together with the condition, specifies the
time(s) when the trigger should be pulled
Event The system event upon which the trigger should be pulled
You can now add your personal script to the system by applying the following parameters:
132