NB2800
User Manual for NRSW version 4.5.0.100
3.4. Interfaces
3.4.1. Overview
Nr. Label Panel Function
1 LED Indicators Front LED Indicators for the different interfaces
2 USB Front USB 2.0 host port, can be used for software/configuration up-
dates.
3 SIM 1-4 Front SIM 1-4, they can be assigned dynamically to any modem by
configuration.
4 Reset Front Reboot and factory reset button
5 ETH 1-2 Rear Gigabit Ethernet ports, can be used as LAN or WAN interface.
6 MOB 1 Rear 2 FAKRA coding D jacks for MIMO LTE antenna
7 MOB 2 Rear 2 FAKRA coding D jacks for MIMO LTE antenna
8 GNSS Rear FAKRA coding C jack for GNSS antenna
9 RS-232 Rear Non-isolated serial RS-232 interface (Pins 4 to 6) which can be
used for console administration, serial device server or other se-
rial based communication applications.
10 PWR Rear Power supply 12-48 VDC (Pins 1 and 2) and Ignition (Pin 3)
17
To Next Page
Loading...
