NB2800
User Manual for NRSW version 4.5.0.100
Configuration
A SIM card is generally assigned to a default modem but might be switched, for instance if you set up
two WWAN interfaces with one modem but different SIM cards.
Close attention has to be paid when other services (such as SMS or Voice) are operating on that
modem, as a SIM switch will naturally affect their operation.
The following settings can be applied:
Parameter WWAN SIM Configuration
PIN code The PIN code for unlocking the SIM card
PUK code The PUK code for unlocking the SIM card (optional)
Default modem The default modem assigned to this SIM card
Preferred service The preferred service to be used with this SIM card. Remember that
the link manager might change this in case of different settings. The
default is to use automatic, in areas with interfering base stations
you can force a specific type (e.g. 3G-only) in order to prevent any
flapping between the stations around.
Registration mode The desired registration mode
Network selection Defines which network shall be selected. This can be bound to a
specific LAI which can be retrieved by running a network scan.
62
To Next Page
Loading...
