Troubleshooting
Issue: ezLINQ fails to register with the netTALK Calling System.
To confirm issue: When you pick up your phone handset, you hear the following recording,
“Register Failed”.
To resolve issue:
1. Unplug the ezLINQ from the electrical outlet and then plug it in again.
This will power cycle the ezLINQ and cause it to restart and connect to the netTALK
Calling System.
2. Wait for the LED light to change from blinking blue to solid light-blue.
When the LED light turns to solid light-blue then the ezLINQ should be registered and
you should be able to make and receive calls.
18
To Previous Page
Loading...
Need help?
General
