Netum NT-1228BC - Han Xin Code and Barcode Character Hiding; Han Xin Code Configuration

Han Xin Code
Enable/Disable Han Xin Code
To enable or disable Han Xin Code, scan the appropriate bar code below.
*Disable Han Xin Code
Enable Han Xin Code
Read Normal Phase/ Phase Reversal
*Read Normal Phase
Read Phase Reversal
Read Normal Phase/ Phase Reversal
Hide Prefix or suffix digits
The start/middle/end of barcode chars can be hidden. After scan below hide set barcode, scan a double-digit
hexadecimal number that you want to hide char length(00~FF e.g. hide length 4, scan 0, 4).