Netum NT-1228BC - Prefix and Suffix Configuration Examples; Example: Add Normal Prefix and Suffix; Example: Add Suffix for!

1. Scan command barcode of " Add Prefix"
2. Check the prefix hex value from the ASCII Chart. A- "4","1"; B-"4" "2";
3. Scan the 2 digit hex value from the Numeric Bar Codes
4. Scan the output format to enable prefix output.
Enable Prefix output
5. Scan command barcode of " Add Suffix" to add "!" as suffix.
Add Suffix
6. Check the suffix hex value from the ASCII Chart. !- "2" "1"
7. Scan the 2 digit hex value from the Numeric Bar Codes.