MICROPHONES: Factory microphones list. Tap to select a microphone. This module will not
be available in the parameter screen layout when using User Impulse Responses.
MIC POSITION: Six xed positions for the currently selected microphone. Tap to select a
position. This module will not be available in the parameter screen layout when using User
Impulse Responses.
LEVEL FADER: Drag to increase/decrease the Impulse Response output volume.
HI PASS FADER: Increase to remove low frequencies from the Impulse Response signal.
LOW PASS FADER: Decrease to remove high frequencies from the Impulse Response signal.
To Next Page
Loading...
